Texas Instruments TPS61007EVM-177, Руководство пользователя, Страница: 9 / 16

Setup of the EVM
1-3 Introduction
1.3 Setup of the EVM
It is important to establish all connections to the EVM before the power supply
connected to the EVM is turned on.
1) Connect a power supply (0.9 V to V
O
, depending on the output voltage of
the EVM) to the INPUT header.
2) Connect a voltmeter to the OUTPUT header.
3) Verify that the jumper, J1, is set to EN.
4) Turn on the power supply and verify the output voltage.