Texas Instruments TPS53355EVM-864, Руководство пользователя

Страница: 7 / 29

FAN
V1
A1
DC
Source
Vin
-
+
Load
+
V2
-
I
NSTRUMENTS
T
EXAS
www.ti.com
Test Setup
7 SLUUBJ6 – November 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Green TPS53355EVM-864 Evaluation Module
5.2 Recommended Test Setup
Figure 3 is the recommended test setup to evaluate the TPS53355EVM-864. Working at an ESD
workstation, ensure that any wrist straps, bootstraps, or mats are connected referencing the user to earth
ground before power is applied to the EVM.
Figure 3. TPS53355EVM-864 Recommended Test Setup
Input Connections:
1. Prior to connecting the dc input source Vin, it is advisable to limit the source current from V
IN
to 10 A
maximum. Ensure that V
IN
is initially set to 0 V and connected as shown in Figure 3 .
2. Connect a voltmeter V1 at TP1 (V
IN
) and TP2 (GND) to measure the input voltage.
3. Connect a current meter A1 to measure the input current.
Output Connections:
1. Connect Load to J3, and set Load to constant resistance mode to sink 0 Adc before V
IN
is applied.
2. Connect a voltmeter V2 at TP5 (VOUT) and TP7 (GND) to measure the output voltage.
Other Connections:
Place a fan as shown in Figure 3 , and turn it on, making sure that air is flowing across the EVM.