Texas Instruments TPS40130EVM-001, Руководство пользователя

Страница: 16 / 18

www.ti.com
7 List of Materials
List of Materials
Table 4 lists the EVM components as configured according to the schematic shown in Figure 1 and
Figure 2 .
Table 4. TPS40130EVM-001 Bill of Materials
(1) (2) (3) (4)
Count RefDes Description Size MFR Part Number
4 C1, C2, C29, Capacitor, ceramic, 22-µF, 16-V, X7R, 15% 1210 TDK C3225X7R1C226M
C30
7 C3, C7, C8, Capacitor, ceramic, 0.1-µF, 25-V, X7R, 10% 805 Std Std
C15, C24,
C26, C31
1 C4 Capacitor, ceramic, 47-pF, 50-V, NPO, 10% 805 Std Std
0 C5, C11 Capacitor, ceramic, pF, 50-V, X7R, 10% 805 Std Std
7 C6, C9, C10, Capacitor, ceramic, 1000-pF, 50-V, X7R, 10% 805 Std Std
C19, C25,
C27, C28
6 C12, C14, Capacitor, aluminum, 220-µF, 5-m
Ω
, 4-V, 20% 7343 Panasonic EEF-UEOG221R
C16, C17, (UE Series)
C20, C23
1 C13 Capacitor, ceramic, 100-pF, 50-V, NPO, 10% 805 Std Std
2 C18, C22 Capacitor, ceramic, 1-µF, 16-V, X5R, 10% 805 Std Std
1 C21 Capacitor, ceramic, 3300-pF, 50-V, X7R, 10% 805 Std Std
1 C32 Capacitor, ceramic, 0.22-µF, 16-V, X7R, 10% 805 Panasonic ECJ-2VB1C224K
1 C33 Capacitor, POSCAP, 100-µF, 10-V, 40-m
Ω
, 20% 7343(D) Sanyo 10TPB100ML
2 D1, D2 Diode, Schottky, 200-mA, 30-V SOD323 On Semi BAT54HT1
6 J1, J2, J3, J5, Terminal block, 2-pin, 15-A, 5,1-mm 0.40 x 0.35 OST ED1609
J6, J7
1 J4 Terminal block, 4-pin, 15-A, 5,1-mm 0.80 x 0.35 OST ED2227
2 L1, L2 Inductor, SMT, 0.68-µH, 30-A, 0.9-m
Ω
0.524 x 0.492 Wurth S0410124A
4 Q1, Q2, Q5, MOSFET, N-channel, 30-V, 55-A, 2.5-m
Ω
LFPAK Renesas HAT2165H
Q6
2 Q3, Q4 MOSFET, N-channel, 30-V, 20-A, 6-m
Ω
LFPAK Renesas HAT2168H
1 R1 Resistor, chip, 2.94-k
Ω
, 1/10-W, 1% 805 Std Std
4 R10, R11, Resistor, chip, 2.74-
Ω
, 1/10-W, 1% 805 Std Std
R22, R25
5 R12, R13, Resistor, chip, 5.11-
Ω
, 1/10-W, 1% 805 Std Std
R15, R16,
R17
1 R14 Resistor, chip, 8.66-k
Ω
, 1/10-W, 1% 805 Std Std
1 R18 Resistor, chip, 2.21-k
Ω
, 1/10-W, 1% 805 Std Std
1 R19 Resistor, chip, 1.0-k
Ω
, 1/10-W, 1% 805 Std Std
1 R2 Resistor, chip, 49.9-
Ω
, 1/10-W, 1% 805 Std Std
1 R20 Resistor, chip, 10-
Ω
, 1/10-W, 1% 805 Std Std
1 R21 Resistor, chip, 82.5-k
Ω
, 1/10-W, 1% 805 Std Std
5 R3, R27, R29, Resistor, chip, 0-
Ω
jumper, 1/10-W, 5% 805 Std Std
R32, R33
1 R30 Resistor, chip, 11.5-k
Ω
, 1/10-W, 1% 805 Std Std
1 R31 Resistor, chip, 1.62-k
Ω
, 1/10-W, 1% 805 Std Std
4 R4, R6, R23, Resistor, chip, 10-k
Ω
, 1/10-W, 1% 805 Std Std
R24
(1)
These assemblies are ESD sensitive, ESD precautions shall be observed.
(2)
These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
(3)
These assemblies must comply with workmanship standards IPC-A-610 Class 2.
(4)
Ref designators marked with an asterik " * " cannot be substituted. All other components can be substituted with equivalent
manufacturers components.
12-V Input, 1.5-V Output, 40-A Two Phase Synchronous Buck Converter Using the TPS40130 16 SLUU208 – October 2004