Texas Instruments TPS3700EVM, Руководство пользователя, Страница: 1 / 13

1 SLVU950A – August 2013 – Revised February 2019
Submit Documentation Feedback
Copyright © 2013–2019, Texas Instruments Incorporated
TPS3700EVM-202 High voltage (18V) window voltage detector evaluation
module for SON package
User's Guide
SLVU950A – August 2013 – Revised February 2019
TPS3700EVM-202 High voltage (18V) window voltage
detector evaluation module for SON package
This user’s guide describes the operational use of the TPS3700EVM-202 Evaluation Module (EVM) as a
reference design for engineering demonstration and evaluation of the TPS3700EVM high voltage, over
and under voltage supervisory circuit. Included in this user’s guide are setup instructions, a schematic
diagram, PCB layout drawings, and a bill of materials for the EVM.
Contents
1 Introduction
...................................................................................................................
1
2 Setup
..........................................................................................................................
1
2.1 Input/Output Connector and Jumper Descriptions
.............................................................
2
2.2 Equipment Setup
....................................................................................................
3
3 Operation
.....................................................................................................................
3
3.1 General Operation
..................................................................................................
3
4 Board Layout
.................................................................................................................
5
5 Schematic
.....................................................................................................................
6
6 Bill of Materials
...............................................................................................................
7
List of Figures
1 OUTA and OUTB Response for Sense Voltage Rising
................................................................
3
2 OUTA and OUTB Response for Sense Voltage Falling
................................................................
4
3 Assembly Layer
..............................................................................................................
5
4 Top Layer Routing
...........................................................................................................
5
5 Bottom Layer Routing
.......................................................................................................
6
6 TPS3700EVM-202 Schematic
.............................................................................................
6
List of Tables
1 Connector J10 Selections
..................................................................................................
2
2 Connector J11 Selections
..................................................................................................
2
3 TPS3700EVM-202 Bill of Material
.........................................................................................
7
1 Introduction
TI's TPS3700EVM-202 EVM helps design engineers evaluate the operation and performance of the
TPS3700 IC for possible use in their own circuit application. This particular EVM configuration contains an
over and under voltage supervisory circuit with a wide supply range, independent open drain outputs, very
low quiescent current, and high accuracy in a 1.5 mm × 1.5 mm DSE package. This document describes
the configuration and set up of the TPS3700EVM-202 EVM board.
2 Setup
This section describes the jumpers and connectors on the EVM as well as how to properly connect, setup,
and use the TPS3700EVM-202.