Quick Setup Guide
www.ti.com
PCB Key Map
Physical structure for the TPL7407LEVM is illustrated in
Figure 1
.
Figure 1. Physical Structure for the TPL7407LEVM (Approximate Layout)
2
Quick Setup Guide
This section describes the setup to quickly check the functionality of TPL7407LEVM.
2.1
Electrostatic Discharge Warning
Many of the components on the TPL7407LEVM are susceptible to damage by electrostatic discharge
(ESD). Customers are advised to observe proper ESD handling precautions when unpacking and handling
the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
CAUTION:
Failure to observe ESD handling procedures may result in damage to EVM components.
Unpacking the EVM
After opening the TPL7407LEVM package, check to ensure that the following items are included:
•
1 pc. TPL7407LEVM board using one TPL7407LDR
•
3 pc. Eight pin insulation displacement connectors that accept AWG 22 insulated wire.
2
TPL7407L7-Channel Relay and Inductive Load Sink Driver EVM
SLRU005 – February 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated