Texas Instruments TMUXBQB-DYYEVM, Руководство пользователя

Страница: 7 / 22

Table 4-1. Connections by Header Pin Number
Header pin number Connection
1 No connection
2 VDD
3 GND
4 U1
5 GND
6 VSS
For all headers J1 through J16, the connections are the same, but are rotated by a multiple of 90° according to
their position on the board. A legend is included for each rotation.
In addition to headers, multiple test points are located around the board. Black test points (TP18 and TP20-
TP26) are connected to GND, the red test point (TP17) is connected to VDD, and the green test point (TP19) is
connected to VSS. The remaining blue test points (TP1-TP16 and TP101-TP116) are connected along the signal
paths of the pins of U1.
Figure 4-3. Test Point Colors
Table 4-2 shows the test point connections.
Table 4-2. Test Point Connections
Designator Connection
TP1
J1.4
TP2
J2.4
TP3
J3.4
TP4
J4.4
TP5
J5.4
TP6
J6.4
TP7
J7.4
TP8
J8.4
www.ti.com TMUXBQB-DYYEVM Header Connections and Test Points
SCDU029 – DECEMBER 2021
Submit Document Feedback
TMUXBQB-DYYEVM User's Guide 7
Copyright © 2021 Texas Instruments Incorporated