3 Information About Cautions and Warnings
The information in the warning statement is provided for personal protection and the information in the caution
statement is provided to protect the equipment from damage. Read each caution and warning statement
carefully.
CAUTION
This EVM contains components that can potentially be damaged by electrostatic discharge. Always
transport and store the EVM in its supplied ESD bag when not in use. Handle using an antistatic
wristband. Operate on an antistatic work surface. For more information on proper handling, see
Electrostatic Discharge (ESD).
4 Features
The TMUX-24PW-EVM has the following features:
• 3 power supply decoupling capacitors from VDD to GND (3 × 3.3 µF)
• 1 protection diode pad from VDD to GND available near power supply (6.9 mm × 5.8 mm)
• 3 power supply decoupling capacitors from VSS to GND (3 × 3.3 μF)
• 1 protection diode pad from VSS to GND available near power supply (6.9 mm × 5.8 mm)
• Terminal block power supply connection
• DUT footprint compatible with 24-pin PW (TSSOP) packages
• 24 length-matched signal inputs corresponding to the 24 pins of the DUT
• Selectable connections to VDD, VSS, or GND for each signal input using 2.54 mm shunt
• Footprints for pull-up and pull-down resistors for each signal input (2 × 0603 footprint on each of 24 signals)
• Footprints for series resistors for each signal input (2 × 0805 footprint on each of 24 signals)
• Footprints for decoupling capacitors for each input (1 × 1206 footprint and 1 × 1812 footprint on each of 24
signals)
• 2 test points for each signal input
• Multiple GND test point connections around board
Information About Cautions and Warnings
6
TMUX-24PW-EVM User's Guide
SCDU026 – JULY 2021
Copyright © 2022 Texas Instruments Incorporated