2.1
Hardware
2.1.1 Development/Debug Host Machine
2.2
Software
2.2.1 Generic Software Requirement
2.2.2 Platform Specific Software Requirements for DaVinci EVM
SPRUEW0 – March 2007
Mininum System Requirements
This section includes the system requirements for integrating LINK binaries and
executing the LINK samples.
The following are the target requirements to test and run this software:
•
DaVinci EVM board, Rev-D
•
Standard RS232 serial port for loader communications.
•
Any Ethernet adapter for the host platform to support Ethernet download/debug/retail connectivity
(optional). A local area network (LAN) hub is recommended.
•
Serial cable
•
Ethernet cable
The following are the requirements for the DSPLINK for Windows CE. All requirements are for the host
machine unless otherwise noted.
•
500MHz Pentium II processor or higher; 1GHz recommended.
•
Microsoft
®
Windows
®
2000 Professional with Service Pack 2 (SP2) or Windows XP Professional.
•
256MB of RAM
•
Microsoft Windows CE 5.0 Platform Builder
•
250MB of free disk space
•
At least 300MB of additional disk space to build the image
•
Platform Builder for Windows CE 5.0 with all the patches installed
•
Tera Term (or any other serial port emulation program)
•
Windows CE 5.0 BSP for the DaVinci EVM board containing the DSPLINK binaries.
•
CCS 3.2 IDE (if DSP-side development/debugging is required)
10
Mininum System Requirements
SPRUEW0 – March 2007
Submit Documentation Feedback
