Texas Instruments TMS320C54x, Руководство пользователя

Страница: 430 / 469

Error Messages
D-15 Error Messages
Immediate value out of range
Line too long, will be truncated
Location operand truncated
Power of 2 required,
next larger power of 2 assumed
Section Name is limited to 8 characters
Shift value out of range
Specified value out of range
Status bit value out of range
String is too long – will be truncated
Value truncated
Value truncated to x–bit width
Value truncated to byte size
Value out of range
Description
These are warnings about truncated values. The expression
given was too large to fit within the instruction opcode or the
required number of bits.
Action
Check the source to make sure the result will be acceptable,
or change the source if an error has occurred.
W0002
Address expression will wrap–around
Expression will overflow, value truncated
Description These are warnings about arithmetic expressions. The
assembler has done a calculation that will produce the
indicated result, which may or may not be acceptable.
Action Verify the result will be acceptable, or change the source if an
error has occurred.
W0003
.sym for
function name required before .func
Description
This is a warning about problems with symbolic debugging
directives. A .sym directive defining the function does not
appear before the .func directive.
Action
Correct the source.