3 Operation
3.1 Quick Start Setup
The following instructions describe how to set up and use the EVM:
1. Download and install this driver:
http://www.ti.com/lit/zip/sbac253
2. Attach the EVM to the Sensor Control Board (SCB) as shown in
3. Connect the EVM to a PC using a USB cable.
4. Access the GUI in either the Google Chrome
®
or Firefox
®
browser:
a. Search for 'TMAG5273EVM GUI' on
5. Apply a magnetic field to the sensor by waving one of the included handheld magnets around the sensor.
6. Observe the outputs in the GUI. See
for more info on GUI setup and operation.
Operation
4
TMAG5273 Evaluation Manual
SLYU058 – MAY 2021
Copyright © 2021 Texas Instruments Incorporated