Texas Instruments TMAG5115, Руководство пользователя, Страница: 6 / 22

3.2.1 Replacing Sensor Control Board With TMAG5115EVM
This section lists steps for replacing the sensor control board found in the NEMA17 BLDC motors with the
TMAG5115EVM:
1. Remove the backplate from the motor. To remove the backplate, remove the four screws found on the
backside of the motor, opposite to the motor's shaft. See Figure 3-4 . After the screws are removed, the
backplate of the motor should come loose.
Figure 3-4. BLDC Motor (Bottom)
EVM Operation www.ti.com
6 TMAG5115 Evaluation Module SBAU410 – OCTOBER 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated