Connect the TI-Innovator™ Hub to a Graphing Calculator
The TI-Innovator™ Hub connects by a USB cable to a graphing calculator or computer.
The connection lets the Hub receive power and exchange data with the host.
See complete details (page 33).
Connecting TI-Innovator™ Hub
The TI-Innovator™ Hub connects by a USB cable to a graphing calculator or computer.
The connection lets the Hub receive power and exchange data with the host.
Note:
Some peripherals, such as motors, may require auxiliary power. For more
information, see Using an Auxiliary Power Source (page 27).
Connecting to a Graphing Calculator
1. Identify the "
B
" connector on the USB Unit-to-Unit (Mini-A
to Mini-B) cable. Each end of this cable is embossed with
a letter.
2. Insert the "
B
" connector into the
DATA
port at the bottom
of the TI-Innovator™ Hub.
3. Insert the free end of the cable (the "
A
" connector) into the USB port on the
calculator.
Connecting the TI-RGB Array
33
