3
Top - Two connectors:
•
USB-Micro connector (
PWR
) for auxiliary power
required by some components. Also used for
updating the Hub internal software.
•
Breadboard Connector with 20 labeled pins for
communication with connected components. A
breadboard and jumper cables are included with
the TI-Innovator™ Breadboard Pack, sold
separately.
USB Cables
À
USB Unit-to-Unit (Mini-A to Mini-B) - Connects the Hub to a TI CE Graphing
Calculator or a TI-Nspire™ CX Handheld.
Á
USB Standard A to Mini-B - Connects the Hub to a computer running
TI-Nspire™ CX Software.
Â
USB Standard A to Micro - Connects the
PWR
port of the Hub to a TI approved
power source required by some peripherals.
Auxiliary Power
TI Wall Charger - Supplies power through the
TI-Innovator™ Hub for components, such as motors,
that require additional power.
The optional External Battery Pack can also provide
auxiliary power.
Note:
An auxiliary power LED on the Hub indicates
when the Hub is receiving auxiliary power.
Connecting TI-Innovator™ Hub
The TI-Innovator™ Hub connects by a USB cable to a graphing calculator or computer.
The connection lets the Hub receive power and exchange data with the host.
