![background image](http://html1.mh-extra.com/html/texas-instruments/td1000/td1000_assembly-instructions_1095295001.webp)
TDC1000 Ultrasonic “Test Cell” Assembly Instructions
Rev 1.0
Supplies required:
1.
CYA glue w/Latex
2.
CYA Accelerator
3.
Plastic “test cell” container
4.
400 grit sandpaper
5.
Alcohol
6.
Hot glue gun
7.
Ultrasonic transducers w/attached wires
8.
Spray duster/ air gun
Assembly Steps:
1.
Roughen 1cm square area on lower side of plastic container with sandpaper
2.
Degrease with alcohol
3.
Dry area with air gun
4.
Apply CYA glue to 1cm square area