Texas Instruments TCAN1046V, Руководство пользователя

Страница: 4 / 14

Introduction
www.ti.com
4 SLLU296 – August 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
TCAN1046V Evaluation Module
Table 1 lists the jumper connections for the EVM.
Table 1. Jumper Connections
Connection Type Description
J1 6-pin header Used to monitor CANH and CANL on CAN1, GND connections available as well.
J2 2-pin jumper
Used to place R6 (120-
Ω
) on the CAN1 bus. Use in combination with J3 to represent the
combined 60- Ω CAN termination.
J3 2-pin jumper
Used to place R5 (120- Ω ) on the CAN1 bus. Use in combination with J2 to represent the
combined 60-
Ω
CAN termination.
J4 3-pin jumper Used to apply either VCC or GND to STBY1 (pin 14)
J5 12-pin header
Connections for VIO, VCC, TXD, and RXD for both CAN interfaces available, as well as
GND connections.
J6 2-pin jumper
Used to place R20 (120- Ω ) on the CAN2 bus. Use in combination with J3 to represent
the combined 60- Ω CAN termination.
J7 6-pin header Used to monitor CANH and CANL on CAN2, GND connections available as well.
J8 2-pin jumper
Used to place R20 (120-
Ω
) on the CAN2 bus. Use in combination with J3 to represent
the combined 60- Ω CAN terminat
J9 3-pin jumper Used to apply either VCC or GND to STBY2 (pin 8)
J10 2-pin header VCC connection for external power supply
J11 2-pin header VIO connection for external power supply
TP1
Test Point
CANH (CAN1) test point
TP2 STBY (CAN1) test point
TP3 CANH (CAN1) via 330- Ω series resistor test point
TP4 CANL (CAN1) test point
TP5 CANL (CAN1) via 330- Ω series resistor test point
TP6 CANH (CAN2) test point
TP7 TXD (CAN1) test point
TP8 RXD (CAN1) test point
TP9 CANH (CAN2) via 330-
Ω
series resistor test point
TP10 TXD (CAN2) test point
TP11 RXD (CAN2) test point
TP12 CANL (CAN2) test point
TP13 CANL (CAN2) via 330- Ω series resistor test point
TP14 STBY (CAN2) test point
TP15 VCC test point
TP16 VIO test point
TP17 GND test point
TP18 GND test point