Using the GUI Software
8
SLOU481A – August 2017 – Revised October 2017
Copyright © 2017, Texas Instruments Incorporated
TAS5755MEVM Evaluation Module
3
Using the GUI Software
This section describes the details of using the
TAS57xx Graphical User Interface
(GUI) software tool to
interface with the TAS5755M device. The software is available for download at the TAS5755M product
page on
. The main function of the GUI is to provide the user an easy way to manipulate the
device register space for attaining the required signal processing flow. The block diagram of the
Digital
Audio Processing
(DAP) flow of the TAS5755M, taken from the TAS5755M data sheet is shown in
.
Figure 8. TAS5755M DAP Block Diagram
3.1
Launching the GUI interface
The GUI interface can be opened by clicking on the
TAS57X1 GDE
icon under the Texas Instruments Inc
title in the start program menu.
NOTE:
The PPSI2C variable should be set before the GUI interface (or the
Memory Tool
) is opened.
If the GUI was opened prior to setting the environment variable (Step 1), close and then
reopen the GUI interface.
