Texas Instruments TAS5755MEVM, Руководство пользователя

Страница: 14 / 28

Using the GUI Software
www.ti.com
14 SLOU481A – August 2017 – Revised October 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TAS5755MEVM Evaluation Module
Figure 17. TAS57X1 GUI DRC Blocks
The different parameters of the DRC such as Threshold, Compression, Offset and attack, decay time
constants can be programmed using the DRC customization tool, which is opened by double clicking the
DRC block on the GUI window.
Figure 18 shows the controls for DRC-1, with the user programmable
inputs highlighted. The plot on the right estimates the output versus input level corresponding to the user
inputs.
Figure 18. TAS57xx GUI DRC Customization Tool
The DRC time-constants can be programmed via the Time Constants window that can be opened by
clicking on the Time Constants in the DRC customization tool. The Time Constants window snap shot is
shown in Figure 19 .