2
Operation
2.1
Quick Start Guide for use with TAS3308 Digital Audio Signal Processor
Operation
www.ti.com
Follow these steps to use the TAS5602EVM2 along with the TAS3308 EVM. Power and speaker
connections to the EVM module can be made by inserting stripped wire or using banana plugs for the
power supply and output connections. The inputs can be connected directly to the TAS3308 EVM via the
2
×
20 pin header. Set up the TAS3308 according to the instructions given in the TAS3308EVM User's
Guide (
). Download the TAS5602 configuration file from the TAS5602 product folder. This can be
used to optimize the TAS3308 set-up for the TAS5602 power stage.
Some additional adjustments to the Pure Path Studio™ setup for TAS3308 may be necessary to run the
TAS5602EVM2.
1. The input selection is performed by selecting the StereoMux and changing the Mux Select Property to
StereoCh1 or StereoCh2 depending on the type of signal being used. Select StereoCh1
(TAS3308ADCIn-1) if it is Analog input; select StereoCh2 (TAS3308SAPIn-1) if it is SPDIF format
digital input.
2. Build the process flow above and select Build/Generate Code
3. Select Build/Download, and then Run.
4. Press the Mute button on the TAS3308 EVM to turn it to the OFF state. The MUTE indicator LED
should turn off. This is necessary since the TAS3308 EVM transitions to the run mode with the MUTE
in the ON state.
Figure 1. Suggested Process Flow for TAS5602EVM2
TAS5602EVM2 Audio Power Amplifier Evaluation Module
2
SLAU258 – August 2008