3.4
GUI Software Installation
Quick-Setup Guide
www.ti.com
Table 2. Recommended Supply Voltage
Description
Voltage Limitations
Current Requirement
Connector
Output stage power supply
8 V – 23 V
5 A
Red/black
CAUTION
Applying voltages above the limitations given in
Table 2
can cause permanent
damage to your hardware.
The TAS5086 GUI provides easy control of all registers in TAS5086. To install the GUI, run the setup file
from the TAS5102/3 CD-ROM.
After installation, turn on the power supply, and connect the USB cable to the Modulator/Controller board.
Start the GUI program from The Windows™ menu. (Program Files/Texas Instruments Inc) The start-up of
the GUI takes few seconds.
Figure 3. TAS5086 GUI Window
From the files menu, load the configuration file:
TAS5102 EVM Configuration.cfg
The file is located on the TAS5102/3EVM CD-ROM. This file contains all settings for a default setup of the
EVM.
For easy access of the file, it is recommended to copy the files into directory where the GUI is installed.
Default is C:\Program Files\Texas Instruments Inc\TAS5086\.
For more advanced use of the GUI and the features of the TAS5086 modulator, see the GUI User’s Guide
and the TAS5086 data sheet (
SLES131
). The GUI User's Guide can be accessed by clicking on Help in
the toolbar and then selecting
User's Guide
in the drop-down menu.
TAS5102EVM and TAS5103EVM for the TAS5102 and TAS5103 Digital Amplifier Power Output Stages
8
SLLU106 – August 2008
Submit Documentation Feedback
