Texas Instruments TAS2564, Руководство пользователя

Страница: 5 / 18

www.ti.com
Device Configuration
5 SLAU812 – July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
TAS2564YBGEVM-DC User's Guide
5.2 Address Select Jumpers
Table 3. Address Select Jumpers
Address Pin A0 Pin A1
0x98 L L
0x9A H L
0x9C L H
0x9E H H
Figure 3. Address Select
TAS2564 supports 4 user configurable I
2
C addresses shown in Section 5.2 . Use J12 & J13 to configure
Channel 1 and J10 & J11 to configure Channel 2 as shown in Figure 3 .
5.3 Mono Setup
Use the following instructions to complete a mono setup:
1. Install PPC3 with the TAS2564 plug-in.
2. Connect a speaker to J8 on the TAS2564YBGEVM-DC.
3. Remove the jumpers at J3 and J4 as shown in Figure 4 .
Figure 4. Mono Setup