Texas Instruments TAS2562YFPEVM-DC, Руководство пользователя

Страница: 3 / 19

www.ti.com
Software
3 SLAU788 – October 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
TAS2562YFPEVM-DC User's Guide
NOTE: PPC3-EVM-MB supports a VBAT range from 4.5 to 26 V. To apply a VBAT supply in the
range of 2.7 to 4.5 V, it is highly recommended to remove Jumpers J3 and J6 and to apply
this voltage directly to pin 2 of the respective header while simultaneously powering PPC3-
EVM-MB with 5 V. Otherwise it is possible that on-board supplies may collapse.
5 Software
The TAS2562 can be easily configured with PPC3 running the TAS2562 plug-in. To request access to
the software first request a myTI.com account
here .
After creating an account, navigate to the TAS2562 product page and follow the link in the information
box to request access to the software.
Figure 1. Requesting PPC3 Access
6 Device Configuration
The default configuration for the TAS2562 is described below in Table 2 and Figure 2 .
6.1 Default Jumper Settings
Table 2. Default Jumper Settings
Jumper Setting Description
J11 L Ch 2 ADDR 1
J10 H Ch 2 ADDR 0
J4 Insert Ch 2 VDD
J14 Removed Ch 2 Out
J3 Insert Ch 2 VBAT
J9 – 1&2 Insert Ch 2 GPIO
J9 – 3&4 Insert Ch 1 GPIO
J6 Insert Ch 1 VBAT
J16 Insert EEPROM WP
J15 Insert Ch 1 Out
J7 Insert Ch 1 VDD
J12 L Ch 1 ADDR0
J13 L Ch 1 ADDR1