Device Configuration
5
SLAU788 – October 2018
Copyright © 2018, Texas Instruments Incorporated
TAS2562YFPEVM-DC User's Guide
6.3
Mono Setup
Use the following instructions to complete a mono setup:
1. Install PPC3 with the TAS2562 plug-in.
2. Connect a speaker to J8 on the TAS2562YFPEVM-DC.
3. Remove the jumpers at J3 and J4 as shown in
Figure 4. Mono Setup
4. Set the jumpers at J12 and J13 to the desired I
2
C address as shown in
.
5. Configure PPC3-EVM-MB as described in
•
USB control for I
2
C
•
USB control for I2S
•
3.3 V I
2
C
•
3.3 V I2S
•
1.8 V IOVDD
6. Connect a 5V supply to connector J12 or J11 on PPC3-EVM-MB
7. Connect a Micro USB Cable from PC to PPC3-EVM-MB
8. Verify that TI USB Audio UAC2.0 is the default playback device by opening the sound dialog from the
Windows Control Panel
