Device Configuration
3
SLAU809 – June 2019
Copyright © 2019, Texas Instruments Incorporated
TAS2110EVM User's Guide
5
Device Configuration
The default configuration for the TAS2110 is described below in
and
5.1
Default Jumper Settings
The jumper settings below will configure the EVM for I2C and I2S inputs over USB.
Table 2. Default Jumper Settings
Jumper
Setting
Description
J3
Insert (1-2)
FSYNC
J4
Insert (1-2)
SBCLK
J5
Insert (1-2)
SDIN
J6
Insert (1-2)
GPIO
J7 (1&2)
Insert
VBAT
J7 (3&4)
Insert
VBAT
J8
Remove
I2C Source Level (3.3 V = Out , 1.8 V In)
DO NOT INSERT UNLESS PROVIDING
I2C EXTERNALLY AT 1.8 V
J9
Insert (1-2)
SCL
J11
Insert (1-2)
SDA
J12
Remove
SDOUT (3.3V)
J13
Insert
VDD
J14
Remove
SDOUT(1.8V)
J15
Remove
Output Sense