Export Control Notice
2
SLAU809 – June 2019
Copyright © 2019, Texas Instruments Incorporated
TAS2110EVM User's Guide
Trademarks
PurePath is a trademark of Texas Instruments.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
1
Export Control Notice
Recipient agrees to not knowingly export or re-export, directly or indirectly, any product or technical data
(as defined by the U.S., EU, and other Export Administration Regulations) including software, or any
controlled product restricted by other applicable national regulations, received from disclosing party under
nondisclosure obligations (if any), or any direct product of such technology, to any destination to which
such export or re-export is restricted or prohibited by U.S. or other applicable laws, without obtaining prior
authorization from U.S. Department of Commerce and other competent Government authorities to the
extent required by those laws.
2
Description
TAS2110EVM supports evaluation and development with the TAS2110 device through the following
interfaces:
•
USB Interface
•
Software control via PurePath™ Console 3 (PPC 3) GUI, USB-HID
•
USB-class audio device, compatible with Microsoft
®
Windows
®
7+
•
External 100 – mil headers
•
PSIA - I2S/TDM interface
•
I
2
C
•
Hardware Shutdown Control
•
Interrupt Output
3
Specifications
lists the supply, input, and output requirements for TAS2110.
Table 1. Specifications
Parameter
Value
Supply Voltage - VBAT
2.7 to 5.5 V
Supply Voltage - VDD
1.65 to 1.95 V
Input Logic
VDD
Output Power
6 W
USB, USB class-audio
Micro-USB
4
Software
The TAS2110 can be easily configured with PPC3 running the TAS2110 plug-in. To request access to the
software first request a myTI.com account
.
After creating an account, navigate to the
and follow the link in the information box
to request access to the software.
Figure 1. Requesting PPC3 Access