Texas Instruments Stellaris LM3S6965 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 27

Texas Instruments Stellaris LM3S6965 Скачать руководство пользователя страница 13

Stellaris® LM3S6965 Evaluation Board

January 6, 2010

13

documentation for full details. However, if your debugger interface does not have a selectable
power source, it may be necessary to install a 0-

Ω

resistor on the evaluation board to route power

to pin 1. Refer to the schematics and board drawing in the appendix of this manual for the location
of this resistor.

USB Device Controller Functions

Device Overview

An FT2232 device from Future Technology Devices International Ltd manages USB-to-serial
conversion. The FT2232 is factory configured to implement a JTAG/SWD port (synchronous serial)
on channel A and a Virtual COM Port (VCP) on channel B. This feature allows two simultaneous
communications links between the host computer and the target device using a single USB cable.
Separate Windows drivers for each function are provided on the Documentation and Software CD.

A small serial EEPROM holds the FT2232 configuration data. The EEPROM is not accessible by
the LM3S6965 microcontroller.

For full details on FT2232 operation, go to

www.ftdichip.com

.

USB to JTAG/SWD

The FT2232 USB device performs JTAG/SWD serial operations under the control of the debugger.
A CPLD (U2) multiplexes SWD and JTAG functions and, when working in SWD mode, provides
direction control for the bidirectional data line.

Virtual COM Port

The Virtual COM Port (VCP) allows Windows applications (such as HyperTerminal) to
communicate with

UART0

on the LM3S6965 over USB. Once the FT2232 VCP driver is installed,

Windows assigns a COM port number to the VCP channel.

Serial Wire Out

The evaluation board supports the Cortex-M3 serial-wire output (SWO) trace capabilities. Under
debugger control, the CPLD can route the SWO datastream to the virtual communication port
(VCP) transmit channel. The debugger can then decode and interpret the trace information
received from the VCP. The normal VCP connection to

UART0

is interrupted when using SWO. Not

all debuggers support SWO. Refer to the Stellaris LM3S6965 data sheet for additional information
on the trace port interface unit (TPIU).

Organic LED Display

The EVB features an organic LED (OLED) graphics display with 128 x 96 pixel resolution. OLED is
a new technology that offers many advantages over LCD display technology.

Features

RiT P14201 series display

128 columns by 96 rows

High-contrast (typ. 500:1)

Excellent brightness (120 cd/m

2

)

Fast 10 us response

«
...
11
12
13
14
15
...
»

Содержание Stellaris LM3S6965




























Отзывы:

Нет отзывов