Texas Instruments SN65LVDS386EVM, Руководство пользователя

Страница: 18 / 24

References
4-5
Operation
Note:
When testing an SN65LVDS387EVM and SN65LVDS386EVM together,
make sure R1 through R16 (100
Ω
) are not installed on the
SN65LVDS387EVM. Termination of the LVDS signal lines needs to be done
on the SN65LVDS386EVM.
4.4 References
There is a wide selection of LVDS devices and related applications materials
available to assist in the design and development of LVDS interfaces. This in-
formation is located at
http://www.ti.com/sc/datatran. Input LVDS into the
search tool or enter the part number of a specific device to obtain additional
information.
For more information on these devices visit TI’s web site at
http://www.ti.com/sc/docs/apps/analog/lvds_and_lvdm_general_purpose.html
These documents can also be located quickly by inserting the document num-
ber into the Quick Research box at our main web site at http://www.ti.com.
Data sheets:
J
Full data sheet for the LVDS387 in Acrobat PDF: slls362b.pdf (217
KB), or in zipped PostScript: slls362b.psz (214 KB)
J
Full data sheet for the LVDS386 in Acrobat PDF: slls394a.pdf (205
KB), or in Zipped PostScript: slls394a.psz (213 KB)
Application materials:
J
Interface Circuits for TIA/EIA-644 (LVDS) (SLLA038)
J
Low Voltage Differential Signaling (Lvds) Evaluation Module (EVM)
(SLLA033A)
J
Low-Voltage Differential Signaling (LVDS) Design Notes (SLLA014)
J
LVDS Devices Operate With V
CC
= 2.5-Vdc (SLLA046)
J
LVDS in Harsh Environments With the Next Generation Receivers
From TI (SLLA061)
J
LVDS Multidrop Connections (SLLA054)
J
Measuring Crosstalk in LVDS Systems (SLLA064)
J
Performance of LVDS With Different Cables (SLLA053)
J
Slew Rate Control of LVDS Circuits (SLLA034A)
Finally, the May 2000 edition of the
TI Applications Journal contains an article
that presents test results from the LVDS387 EVM and LVDS386 EVM when
connected together in a point-to-point system using twisted-pair ribbon cable.