![Texas Instruments SimpleLink Wi-Fi CC3 20 Series Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/texas-instruments/simplelink-wi-fi-cc3-20-series/simplelink-wi-fi-cc3-20-series_user-manual_1094697006.webp)
6 Flashing the Board
The devices must be flashed with the correct ServicePack to operate this tool correctly. The service pack can be
found in the tools folder of the SDK installed.
If using the CC32xx device, the Radio Tool application must be flashed in addition to the ServicePack. The
precompiled application binary is in the CC32xxBoardApplication Binary folder.
In case Uniflash is installed on the same windows machine as RadioTool, a predefined *.sli image can be
selected and programmed to the device as shown in
.
Figure 6-1. RadioTool Setup Page
For instructions on flashing the devices, see the
CC3x20, CC3x3x UniFlash ImageCreator
for details.
Flashing the Board
6
SimpleLink™ Wi-Fi® CC3x20, CC3x3x Radio Tool User Guide
SWRU471B – FEBRUARY 2017 – REVISED AUGUST 2020
Copyright © 2020 Texas Instruments Incorporated