Texas Instruments SimpleLink CC2652PSIP, Руководство пользователя, Страница: 10 / 68

8 Specifications
8.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1) (2)
MIN MAX UNIT
VDDS
(3)
Supply voltage –0.3 4.1 V
Voltage on any digital pin
(4) (5)
–0.3 VDDS + 0.3, max 4.1 V
V
in
Voltage on ADC input
Voltage scaling enabled –0.3 VDDS
V Voltage scaling disabled, internal reference –0.3 1.49
Voltage scaling disabled, VDDS as reference –0.3 VDDS / 2.9
Input level, RF pin 5 dBm
T
stg
Storage temperature –40 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to ground, unless otherwise noted.
(3) VDDS_DCDC, VDDS2 and VDDS3 must be at the same potential as VDDS.
(4) Including analog capable DIOs.
(5) Injection current is not supported on any GPIO pin
8.2 ESD Ratings
VALUE UNIT
V
ESD
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS001
(1)
All pins ±1000 V
Charged device model (CDM), per JESD22-C101
(2)
All pins ±500 V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
8.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
Operating junction temperature
(1)
–40 105 °C
Operating supply voltage (VDDS) 1.8 3.8 V
Rising supply voltage slew rate 0 100 mV/µs
Falling supply voltage slew rate 0 20 mV/µs
(1) For thermal resistance characteristics refer to Section 8.8.
8.4 Power Supply and Modules
over operating free-air temperature range (unless otherwise noted)
PARAMETER MIN TYP MAX UNIT
VDDS Power-on-Reset (POR) threshold 1.1 1.5 V
VDDS Brown-out Detector (BOD) Rising threshold 1.77 V
VDDS Brown-out Detector (BOD), before initial boot
(1)
Rising threshold 1.70 V
VDDS Brown-out Detector (BOD) Falling threshold 1.75 V
(1) Brown-out Detector is trimmed at initial boot, value is kept until device is reset by a POR reset or the nRESET pin
CC2652PSIP
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022
www.ti.com
10 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: CC2652PSIP