3
Read This First
About This Manual
This reference guide for the S6350 High-frequency (13.56Mhz) Reader is designed for use by TI
customers who are engineers experienced with RFID Systems and Radio Frequency
Identification Devices (RFID).
Device Name
Firmware
Version
Hardware Configuration
RI-STU-TRDC-01
1.4 (ISO 15693-3)
Right-Angle Connector
RI-STU-TRDC-02
1.4 (ISO 15693-3)
Straight Connector
Regulatory, safety and warranty notices that must be followed are provided in Chapter 4.
Conventions
The following pictograms and designations are used in the operating instructions:
WARNING:
A WARNING IS USED WHERE CARE MUST BE
TAKEN, OR A CERTAIN PROCEDURE MUST BE
FOLLOWED, IN ORDER TO PREVENT INJURY OR
HARM TO YOUR HEALTH.
CAUTION:
This indicates information on conditions, which must be
met, or a procedure, which must be followed, which if not
needed could cause permanent damage to the system.
Note:
Indicates conditions, which must be met, or procedures which must
be followed, to ensure proper functioning.
Information:
Indicates conditions or procedures that should be followed to ensure
proper functioning of the system.
Preface
