PCM5122/42EVM-U
2.4
Jumpers, Connectors, Test Points, Switches
summarizes the connectors, test points, jumpers, and switches on the PCM5122/42EVM-U.
Table 1. PCM5122/42EVM-U Headers, Test Points, Jumpers, and Switches
Connectors/Switch/Jumper/Test Point
Description
Headers
W1
I
2
C/SPI Selection. Shunt pins 1-2 for SPI, 2-3 for I
2
C control mode
W2
I
2
C/SPI Selection. Shunt pins 1-2 for SPI, 2-3 for I
2
C control mode
W3
Interface Connection. Shunt respective headers to send digital signals to
PCM5122/42.
W4
AVDD power. Shunt pins 1-2 or 3-4 for AVDD.
W5
MCLK/RXCKO select
Test Points
TP1
GPIO4/GPIO4/MAST
TP2
GPIO5/GPIO5/ATT0
TP3
MC/SCL/ATT1
TP4
MOSI/SDA/ATT2
TP5
GPIO3/GPIO3/AGNS
TP6
GPIO2/ADR2/DOUT
TP7
MODE1
TP8
MS/MODE2/MODE2
TP9
FLT
TP10
SCK
TP11
BCK
TP12
DIN
TP13
LRCK
TP14
FMT
TP15
XSMT
TP16
PCM5122/42 analog output (R)
TP17
PCM5122/42 analog output (L)
TP18
1.8 V
TP19
3.3 V
TP20
3.3 VA
TP21
GND
TP22
GND
TP23
GND
TP24
AGND
TP25
AGND
TP26
AGND
TP27
BCLK (TAS1020B)
TP28
WCLK (TAS1020B)
TP29
DIN (TAS1020B)
TP30
SCL (TAS1020B)
TP31
SDA(TAS1020B)
TP32
RESET
Jumpers
J1
PCM5122/42 RCA analog output (R)
J2
PCM5122/42 RCA analog output (L)
J3
Mini-USB connection
J4
Optical S/PDIF input
5
SLAU444 – May 2012
PCM5122/42EVM-U
Copyright © 2012, Texas Instruments Incorporated