Launching the Software
11
SBOU156B – October 2015 – Revised February 2017
Copyright © 2015–2017, Texas Instruments Incorporated
OPT8241 Evaluation Module
9
Launching the Software
Launch the software using the following:
1. On Windows, click on the desktop shortcut created or navigate to <installation folder>/bin and click on
VoxelViewer.exe to launch the software. On Linux
®
, execute the voxelviewer command.
2. Once the viewer is up, streaming should automatically start.
3. If the EVM is connected after the viewer has started, use the camera connection dialog box to refresh
the list of cameras, choose the appropriate camera and click OK. The camera connection dialog box is
also available through the File menu –
File
→
Connect Depth Camera (CTRL+C)
.
4. A sample screenshot with streaming enabled is shown in
5. The streaming can be paused/started using the play/pause button near the top-left corner of the
window.
6. The state of streaming can also be confirmed on the hardware by looking at the color of the Master
LED. The Master LED is cyan while streaming and green when the streaming is stopped.
Figure 7. Streaming Enabled
