Texas Instruments MSP432, Руководство пользователя

Страница: 13 / 17

www.ti.com
MSP-TS432PZ100
13 SLAU571A – March 2015 – Revised May 2016
Submit Documentation Feedback
Copyright © 2015–2016, Texas Instruments Incorporated
Hardware
Table 1-4. Important Board Components (continued)
Reference Description
JP16
Header to disconnect AVCC from VCC supply. Connect an ampere meter to measure current flowing into the
analog domain.
J7
VCC header. Can be used to observe device VCC when supplied by the debug probe or to feed in external
power.
1.2.5.1 Bill Of Materials
Table 1-5 lists the bill of materials for the MSP-TS432PZ100.
Table 1-5. MSP-TS432PZ100 Bill Of Materials
Pos. Ref Des. No.
No. Per
Board
Description Digi-Key Part No. Comment
1 PCB 1 95.0 x 100.0 mm
"MSP-TS432PZ100" Rev.
1.1
2 layers, green solder mask
2 C1, C2 2 12pF, CSMD0805 1276-1120-1-ND DNP
3 C8, C9 2 22pF, CSMD0805 490-3608-1-ND
4 C3 1 10uF/10V, CSMD0805 490-1709-2-ND
5
C4, C6, C10, C13,
C14
5 100nF, CSMD0805 490-1666-1-ND
6 C5 1 1.1nF, CSMD0805 490-1623-2-ND
7 C7, C11, C15, C16 4 1uF/10V, CSMD0805 490-1702-2-ND
8 C12 1 4u7, CSMD0805 445-1370-1-ND
9 D1 1
green LED, HSMG-C170,
DIODE0805
516-1434-1-ND
10 D2 1 yellow LED, DIODE0805 DNP
11 D3 1 red LED, DIODE0805 DNP
12 R1 1 330R, 0805 541-330ATR-ND
13 R2, R3, 2 330R, 0805 541-330ATR-ND DNP
14 R5, R6, R7, R8, R9 5 0R, 0805 541-0.0ATR-ND DNP
15 L1 1 4.7uH, 0806 490-4044-1-ND Murata
16 R12, R13, R15 3 0R, 0805 541-0.0ATR-ND
17 R4 1 47k, 0805 541-47KATR-ND
18 R10, R11 2 4k7, 0805 541-4.7KATR-ND
19 R14 1 47k, 0805 541-47KATR-ND DNP
20 R16 1
91kOhm, 0.1%, 25ppm/°C ,
0805
P91KDACT-ND
21
R17, R18, R19,
R20, R21, R22, R23
7 27R, 0805 541-27ATR-ND
22
JP1, JP2, JP9, JP7,
JP16
4 2-pin header, male, TH SAM1035-02-ND place jumper on header
23 JP8, JP12, JP15 3 2-pin header, male, TH SAM1035-02-ND not jumpered
24 JP10, JP11 2 2-pin header, male, TH SAM1035-02-ND
DNP, keep pads free of
solder
25 J1 1 3-pin header, male, TH SAM1035-03-ND place jumpers on pins 1-2
26
JP3, JP4, JP5, JP6,
JP14
5 2x2-pin header, male, TH SAM1034-02-ND
27 J2, J7 2 3-pin header, male, TH SAM1035-03-ND
28 J3, J4, J5, J6 4 25-pin header, TH SAM1029-25-ND
DNP: Headers are enclosed
in kit. Keep vias free of
solder.