Texas Instruments MSP430FR6047, Руководство пользователя

Страница: 13 / 19

• If no signal is observed, check the transducer connections to the platform. Connect the transducers as shown
in Section 2 .
• Be sure that the pipe is filled with water. If no water is in the pipe or the transducers are not connected
properly to the EVM, the captured signal may look similar to Figure 4-9 .
Figure 4-9. Captured ADC Signal With No Water or Bad Connection
To save the capture, click the "Save Capture" button and provide a filename. To continuously capture to a file,
click the "Continuous Capture" button and provide a filename.
www.ti.com USS GUI
SLAU810B – SEPTEMBER 2019 – REVISED SEPTEMBER 2020
Submit Document Feedback
Water Flow Meter 13
Copyright © 2020 Texas Instruments Incorporated