Texas Instruments MSP-EXP430FR5739 Скачать руководство пользователя страница 13

Страница: 13 / 23

www.ti.com

MSP-EXP430FR5739 User Experience Demo

2.3

View, Edit, or Recompile the User Experience Code Using an IDE

There are different development software tools available for the MSP-EXP430FR5739 board. IAR
Embedded Workbench

™

KickStart

™

and Code Composer Studio

™

(CCS) IDEs are both available in a

free limited version. IAR Embedded Workbench allows 4KB of C-code compilation. CCS is limited to a
code size of 16KB. The software is available at

www.ti.com/msp430

To view, modify, or edit the User Experience code provided with the MSP-EXP430FR5739, an IDE
installation is required. The associated software package (see

Section 2.1

) supports both IAR and CCS

projects.

The User Experience source files and project folders are provided in the folder [Install
Path]\MSP-EXP430FR5739\MSP-EXP430FR5739 User Experience.

2.3.1

Setting up the IAR Workspace for the User Experience Code

To set up the IAR workspace for the User Experience demo source code:

1. Double-click and open MSP-EXP430FR5739_Workspace.eww in IAR.

2. The Project is automatically included in the workspace.

3. Click Project

→

Download

Debug to download the code to the MSP-EXP430FR5739 Experimenter

Board.

4. If multiple emulation tools are connected to your PC, click Project

→

Options

→

FET Debugger

→

Connection to explicitly select the experimenter board.

2.3.2

Importing the CCS Project for the User Experience Code

To import the CCS project for the User Experience demo source code:

1. Create a workspace folder.

2. Open CCS and point to the newly created workspace folder.

3. Click Project

→

Import Existing CCS/CCE Eclipse Project.

4. Browse to the folder [Install Path]\MSP-EXP430FR5739\MSP-EXP430FR5739 User Experience that

was extracted from the associated zip file (see

Section 2.1

5. The project MSP-EXP430FR5739_UserExperience is automatically selected.

6. Click Finish to include the project in the current workspace.

7. Click the Debug icon to download the project

2.3.3

Source Files

Table 1

describes the source files for the User Experience demo.

Table 1. User Experience Source Files

Name

Description

Main.c

This file contains the user experience demo

Main.h

This file contains the definitions that are required for main.c

FR_EXP.c

This file contains the definitions of all C functions used by main.c

FR_EXP.h

This file contains all the function declarations needed by main.c and FR_EXP.c

SLAU343B

–

May 2011

–

Revised February 2012

MSP-EXP430FR5739 FRAM Experimenter Board

Submit Documentation Feedback

2011

–

2012, Texas Instruments Incorporated

Содержание MSP-EXP430FR5739























Результаты поиска

Содержание MSP-EXP430FR5739

Отзывы:

Бренды по названию

Популярные бренды

Texas Instruments MSP-EXP430FR5739, Руководство пользователя

Результаты поиска

Содержание MSP-EXP430FR5739

Отзывы:

Бренды по названию

Популярные бренды