MSOP-8EVM-PDK Kit Operation
12
SBAU140A – December 2008 – Revised February 2016
Copyright © 2008–2016, Texas Instruments Incorporated
MSOP-8EVM and MSOP-8EVM-PDK
6.3.2
Connecting a Laboratory Power Supply
A laboratory power supply can be connected through terminal block J14 on the MMB0, as shown in
.
To use a unipolar lab power supply configuration:
•
Disconnect J12 on the MMB0.
•
Connect a +5V dc supply to the +5VD terminal on J14.
•
Connect ground of the dc supply to the GND terminal on J14.
It is not necessary to connect a +5V dc supply voltage to the +5VA terminal on J14 if the +5V/+5VA
position on J13 is shorted.
Figure 6. Laboratory Power-Supply Connection
