Figure 4-5. MCT8316AEVM LEDs
4.5 User-Configurable Settings
The MCT8316AEVM includes a variety of user-selectable jumpers, switches, and resistors on the entirety of the
evaluation board to configure settings.
summarizes all of these configurable settings.
Table 4-2. Description of User-Selectable Settings on MCT8316AEVM (Default in Bold)
Designator
Setting Name
Description
Layer
Position
Function
L1/L2/R9
Buck Regulator
mode
User populates L1, L2, or R9 to
choose switching component for
buck regulator
Top
L1 = 47uH Inductor
Inductor Mode
Bottom
L2 = 22 μH
Inductor Mode
Bottom
R1 = 22 Ω
Resistor Mode
J5
3V3_SEL
Select 3.3 V for MCU power
Top
J5 = 3V3EXT
External
J5 = 3V3COM
From FTDI (30 mA)
J3
5V_SEL
Select 5 V for FTDI power
Top
J3 = 5V_EXT
External
J3 = 5V_USB
From USB power
(500 mA)
Hardware and Software Overview
MCT8316AEVM Evaluation Module
9
Copyright © 2021 Texas Instruments Incorporated
