Texas Instruments LP875761-Q1, Руководство пользователя

Страница: 4 / 36

3.1 Installing/Opening the Software
The EVM software is controlled through a graphical user interface (GUI). The software communicates with the
EVM through an available USB port. The minimum hardware requirements for the EVM software are:
• IBM PC-compatible computer running a Microsoft Windows XP ® or newer operating system
• Available USB port
• Mouse
Software installation
1. Open the LP8757_installer.exe .
2. Installer prompts to accept the license agreement (see Figure 3-1 ).
3. Installer prompts to choose which features of LP8757 Installer you want to install (see Figure 3-2 ).
4. Installer prompts to select Destination Folder (see Figure 3-3 ).
5. Press Install and the installation starts.
6. Installer prompts when installation is complete (see
Figure 3-4 ).
Open the LP8757 GUI. Connect the EVM to the PC with the USB cable.
1. With the power supply disconnected from the unit under test (UUT), open LP8757.exe located in the directory
selected during installation.
2. On the Evaluation SW window bottom right corner you should see text Hardware connected . Refer to Figure
3-5 .
Figure 3-1. LP8757 Installer License Agreement
Quick Setup Guide www.ti.com
4 The LP875761Q1EVM Evaluation Module SNVU751 – OCTOBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated