Quick Start
Select “Data Path Control” from the panel on the left of the main window. The following page will be
shown:
Figure 6.
This page gives an overview of the current state of the LMP92066. “Read All” button downloads current
data from the device and updates the GUI screen. All controls with white background can be modified by
the user and sent immediately to the device (left-click on the control, enter new HEX value, and press
ENTER). Note that device must be in Access Level L2 to allow changes to the internal registers values on
this page. Currently enabled Access Level is indicated at the top of the page. The controls with gray
backgrounds are indicators only.
The 2 Radio Buttons “DRVEN0” and “DRVEN1” enable/disable the FETDRV0 and FETDRV1 outputs of
LMP92066.
8
LMP92066 Dual Temperature-Controlled DAC Evaluation Module
SNAU153 – MARCH 2014
Copyright © 2014, Texas Instruments Incorporated
