Texas Instruments LM5013-Q1EVM Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 18

Texas Instruments LM5013-Q1EVM Скачать руководство пользователя страница 3

•

Personal Safety:

– Wear personal protective equipment, for example, latex gloves and/or safety glasses with side shields or

protect EVM in an adequate lucent plastic box with interlocks from accidental touch.

•

Limitation for Safe Use:

– EVMs are not to be used as all or part of a production unit.

Safety and Precautions

The EVM is designed for professionals who have received the appropriate technical training, and is designed
to operate from an AC power supply or a high-voltage DC supply. Please read this user guide and the safety-
related documents that come with the EVM package before operating this EVM.

CAUTION

!

Do not leave the EVM powered when unattended.

WARNING

Hot surface! Contact may cause burns. Do not touch! A fan should be utilized if full-power operation
is done. The EVM was constructed to highlight the small solutize size and as a result, is not as
thermally optimized as typical application PCB.

WARNING

High Voltage! Electric shock is possible when connecting board to live wire. Board should be
handled with care by a professional.

For safety, use of isolated test equipment with overvoltage and overcurrent protection is highly
recommended.

General TI High Voltage Evaluation User Safety Guidelines

SNVU754A – OCTOBER 2021 – REVISED NOVEMBER 2021

Submit Document Feedback

LM5013-Q1EVM User's Guide

3

Copyright © 2021 Texas Instruments Incorporated

«
1
2
3
4
5
...
»

Содержание LM5013-Q1EVM



















Отзывы:

Нет отзывов