Texas Instruments INA228EVM, Руководство пользователя

Страница: 6 / 25

Operation
www.ti.com
6 SBOU241A – April 2020 – Revised June 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide
4.2 EVM Operation
To use the EVM with the included PAMB Controller, connect the EVM as shown in Figure 1 . Make sure to
set SW0 and SW1 as instructed in Section 4.1 , Step 3 .
Figure 1. EVM on PAMB Controller
4.2.1 Setup
4.2.1.1 Driver Installation
Download and install this driver: http://www.ti.com/lit/zip/sbac253 . This is a one-time step per computer.
Unzip the folder and run the .exe file with administrator privileges.
4.2.1.2 Firmware
The firmware comes preinstalled on the PAMB Controller. Firmware updates will be pushed through the
GUI (requires previous driver to be installed). Downloaded offline GUIs may check for GUI/Firmware
updates depending on the version.