
INA220EVM Hardware Setup
10
SBOU079B – July 2009 – Revised May 2016
Copyright © 2009–2016, Texas Instruments Incorporated
INA220 Evaluation Module
3.5
Connecting the USB Cable to the INA220EVM
shows the typical response to connecting the USB DIG platform to a PC USB port for the first
time. Note that the EVM must be powered on before connecting the USB cable. Typically, the computer
will respond with a
Found New Hardware, USB Device
pop-up. The pop-up typically changes to
Found
New Hardware, USB Human Interface Device
. This pop-up indicates that the device is ready to be used.
The USB DIG platform uses the
Human Interface Device Drivers
that are part of the Microsoft
®
Windows
®
operating system.
In some cases, the Windows
Add Hardware Wizard
will pop up. If this prompt occurs, allow the system
device manager to install the
Human Interface Drivers
by clicking
Yes
when requested to install drivers.
Figure 8. Connecting the USB Cable