Texas Instruments INA220 Скачать руководство пользователя страница 1

Страница: 1 / 23

User's Guide

SBOU079A – July 2009 – Revised February 2010

INA220 Evaluation Module

This user’s guide describes the characteristics, operation, and use of the INA220 evaluation module
(EVM). It covers all pertinent areas involved to properly use this EVM board. This document includes the
physical printed circuit board layout, schematic diagrams, and circuit descriptions.

Contents

Overview

.....................................................................................................................

System Setup

................................................................................................................

INA220EVM Hardware Setup

.............................................................................................

INA220 Software Overview

..............................................................................................

Bill of Materials

.............................................................................................................

List of Figures

Hardware Included with the INA220EVM

................................................................................

INA220EVM Hardware Setup

.............................................................................................

INA220_Test_Board Block Diagram

......................................................................................

INA220_Test_Board Schematic

...........................................................................................

USB_DIG_Platform Theory of Operation

................................................................................

Typical Hardware Connections

............................................................................................

Connecting Power to the EVM

............................................................................................

Connecting the USB Cable

...............................................................................................

INA220EVM Default Jumper Settings

..................................................................................

INA220EVM Software—Functioning Properly

.........................................................................

INA220EVM Software—No Communication with the USB DIG Platform

..........................................

INA220EVM Software—No Communication with the USB DIG Platform and INA220

...........................

EVM Controls Drop-Down Menu

........................................................................................

Current Software Revision

...............................................................................................

List of Tables

Signal Definition of J1 (25-Pin Male DSUB) on INA220_Test_Board

................................................

INA220_Test_Board Jumper Functions

................................................................................

USB DIG Platform Jumper Settings

.....................................................................................

Power-Supply Jumper Configuration #1

................................................................................

Power-Supply Jumper Configuration #2

................................................................................

INA220_Test_Board Parts List

..........................................................................................

Microsoft, Windows are registered trademarks of Microsoft Corporation.
I

C is a trademark of NXP Semiconductors.

All other trademarks are the property of their respective owners.

SBOU079A – July 2009 – Revised February 2010

INA220 Evaluation Module

Submit Documentation Feedback

This datasheet has been downloaded from

http://www.digchip.com

at this

page

Содержание INA220
























Результаты поиска

Содержание INA220

Отзывы:

Похожие инструкции для INA220

Бренды по названию

Популярные бренды

Texas Instruments INA220, Руководство пользователя

Результаты поиска

Содержание INA220

Отзывы:

Похожие инструкции для INA220

Бренды по названию

Популярные бренды