Texas Instruments HSS-MOTHERBOARDEVM Скачать руководство пользователя страница 8

Страница: 8 / 18

Connections Descriptions

www.ti.com

SLVUBD4A – January 2018 – Revised December 2018

Submit Documentation Feedback

High Side Switch Motherboard Evaluation Module

3.2

Jumpers

Table 2

lists the EVM jumper descriptions.

Table 2. Jumper Descriptions

Jumpers

Description

This jumper is used to connect the EN1 pin to 5 V (1-2) or GND (2-3).

J13

This jumper is used to connect the EN2 pin to 5V (1-2) or GND (2-3). Only for 2 channel devices

J10

This jumper is used to connect the DIA_EN pin to 5 V (1-2) or GND (2-3)

J12

This jumper is used to connect the SEL1 pin to 5 V (1-2) or GND (2-3).

J11

This jumper is used to connect SEL2 pin to 5 V (1-2) or GND (2-3)

This jumper connects the TLV70450DBVR ground pin 1 to EVM GND. This with J5 enables LDO

J24

This jumper is used to bypass the ground network used for reverse polarity protection

This jumper is used to power the 5-V TLV70450DBVR LDO with the VBB input for the EVM

This jumper is used to connect the LATCH pin to 5 V (1-2) or GND (2-3)

This jumper connects TLV70450DBVR output to LDO_5V. This with J4 enables LDO.

This jumper connects LDO_5V to the 5-V supply net on the EVM (1-2) or Extern_5V (2-3)

J1, J2, J16

These jumpers connect the motherboard to the daughterboard

J17, J18, J19

Connect Vout1 to single channel

J20, J21, J22

Connect Vout2 to single channel

Содержание HSS-MOTHERBOARDEVM



















Результаты поиска

Содержание HSS-MOTHERBOARDEVM

Отзывы:

Похожие инструкции для HSS-MOTHERBOARDEVM

Бренды по названию

Популярные бренды

Texas Instruments HSS-MOTHERBOARDEVM, Руководство пользователя

Результаты поиска

Содержание HSS-MOTHERBOARDEVM

Отзывы:

Похожие инструкции для HSS-MOTHERBOARDEVM

Бренды по названию

Популярные бренды