Texas Instruments Hall-Hinge-EVM, Руководство пользователя

Страница: 3 / 12

2 Hardware
The EVM PCB is a small form-factor test board with an LED indicator for the output state. The test unit is
installed on a printed circuit board (PCB) with access to each device pin. The PCB format is compatible with
Hall-Adapter-EVM , which allows users to test other devices on a large variety of package options. Please visit
www.ti.com/halleffect when considering additional device selections.
Included with the EVM are several 3D printed structures which combine to produce a test platform with a hinged
lid functionality. The position of the magnet and sensor are customizable and can be manually set to assist with
determining appropriate sensor locations.
Features
• Customizable hinge positions for sensor and magnet
• LED output indicator
• Compatible with
HALL-ADAPTER-EVM
• Access to device pins
3 Operation
Final assembly of the 3D printed structures will be required to complete EVM setup. This may be done with
either HALL-HINGE-EVM or with
HALL-ADAPATER-EVM .
The following steps walk through the procedure to evaluate TMAG5231 with the HALL-HINGE-EVM. If desired,
the 3D assembly may be downloaded, edited and reprinted as needed from
SLYU062.zip .
Figure 3-1 through Figure 3-6 show the components included in this kit.
Figure 3-1. Evaluation Module PCB
Figure 3-2. SENS093_Sensor
Figure 3-3. SENS093_Arm & SENS093_Track
www.ti.com Hardware
SLYU062 – FEBRUARY 2022
Submit Document Feedback
Hall-Hinge-EVM 3
Copyright © 2022 Texas Instruments Incorporated