Troubleshooting ALP Software
26
SNLU232 – August 2018
Copyright © 2018, Texas Instruments Incorporated
DS90UH949A-Q1EVM User's Guide
The software should start with only “DS90UH949” in the “Devices” drop-down menu. If there are more
devices then the software is most likely in demo mode. When the ALP is operating in demo mode there is
a “(Demo Mode)” indication in the lower left of the application status bar as shown in
.
Figure 1-20. ALP in Demo Mode
Select the “Preferences” drop-down menu and un-check the “Enable Demo Mode” check mark to disable
the demo mode.
Figure 1-21. ALP Preferences Menu
After demo mode is disabled, the ALP software will poll the ALP hardware. The ALP software will update
and have only “DS90UH949” under the “Devices” drop-down menu.