Texas Instruments DRV8847 Series, Руководство пользователя

Страница: 3 / 6

www.ti.com
Hardware Overview
3 SLVUBF8 – June 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
DRV8847x EVM User's Guide
2.2 Board Overview
The DRV8847EVM and DRV8847SEVM let the user access the VM (motor voltage) power rail through a
terminal block (J5). A set of test clips in parallel with the terminal block lets the user monitor the input
power rail.
The VM voltage must be applied according to the recommended parameters in the DRV8847 Dual H-
Bridge Motor Driver data sheet .
Figure 2 shows the primary blocks of the hardware on the DRV8847EVM or DRV8847SEVM.
NOTE: The VDD voltage for the microcontroller comes from the microUSB connector.
Figure 2. DRV8847EVM Board Overview
The primary components of the EVM board are:
• The DRV8847 device (U4) which is a 2.8-V to 18-V dual H-bridge motor driver
• The MSP430G2553 MCU (U1) which is an ultra-low power mixed signal microcontroller
• The power connection (J5)
• The motor Connections (J9, J10)
• The test point (J4)