3.4 Headers and connectors (Hardware device variant)
shows all configuration jumpers for the DRV824xH-Q1 hardware variant. DRV814xH-Q1 features
the same jumpers, with the exception of "MODE". Each "LVL" silkscreen label directly corresponds to the
datasheet description. Changing the jumper within "MODE" allows the user to use the driver in PH/EN, PWM,
and Independent Half-Bridge mode. Please refer to the device datasheet for more information regarding pin LVL
settings and associated configuration.
Note
IPROPI is common to both hardware and SPI EVM/ device variants and performs the same function.
Figure 3-8. DRV824x and DRV814x Hardware variant configuration jumpers
3.5 Headers and connectors (SPI variant)
The and DRV824xS-Q1 and DRV814xS-Q1 SPI device variants omit all headers associated with the hardware
variant described in the previous section.
Evaluation Hardware Overview
SLVUC46A – MARCH 2021 – REVISED JULY 2021
DRV824x_DRV814x-Q1EVM User’s Guide
11
Copyright © 2021 Texas Instruments Incorporated