Additional Hardware Modes
9
SLOU435B – December 2015 – Revised February 2019
Copyright © 2015–2019, Texas Instruments Incorporated
DRV2624 ERM, LRA haptic driver evaluation kit
Figure 12. Haptics Control Console
3.2.1
DRV2624 Console
The DRV2624 Console is divided into three sections Initialization, Work Mode, and Board Status, as seen
below in
. Each section allows the user to control the device on the EVM through I2C writes and
communication.
Figure 13. HCC DRV2624 Console
Please refer to the Haptics Control Console Users Guide for more detailed information on the device
management features accessible through Haptics Control Console. The user’s guide can be found on