Texas Instruments DLP5532HBQ1EVM, Руководство пользователя, Страница: 6 / 21

Figure 1-3. DLP5532HBQ1EVM Illumination Driver PCB (Bottom)
The illumination driver PCB contains the ports listed in Table 1-4 . Note that all ports with the schematic reference
J20# are located on the bottom of the illumination driver PCB board.
Table 1-4. Illumination Driver PCB Ports
Schematic
Reference
Function
J1 Red Illumination Output - High current output up to 10 A
J2 Green Illumination Output - High current output up to 10 A
J3 Input Power
J4 Fan 1 Power Output
J5 Fan 2 Power Output
J6 Fan 3 Power Output
J200 Fan PWM from Controller
J201 Controller-Driver Control Interface
J202 Controller Power
J203 Blue Illumination Output - High current output up to 10 A
J207 Thermistors for Red, Green, and Blue LEDs
The illumination driver PCB contains the headers listed in Table 1-5 . These headers provide a protective
feedback loop between the active cooling fans and the power regulator. In the event that one of the fans is not
working or does not receive adequate input power, the feedback loop disables the power regulator and protects
the illumination driver circuitry. The headers can be removed to disable the fan feedback loops if fans are not
going to be used.
Table 1-5. Illumination Driver Header Pins
Header PIN1 PIN2
J204 Fan 1 Feedback Signal EN_UVLO
J205 Fan 2 Feedback Signal EN_UVLO
J206 Fan 3 Feedback Signal EN_UVLO
User Guide Overview www.ti.com
6 DLP5532HBQ1EVM Evaluation Module DLPU108 – MAY 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated