Texas Instruments DLP4710EVM-LC, Руководство пользователя

Страница: 12 / 15

Blue LED Green LED Red LED Blue LED
Green LED Red LED
DMD Flex cable
EVM Setup
www.ti.com
12 DLPU079A – February 2019 – Revised July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Using the DLP4710EVM-LC Light Control Evaluation Module
The DLP4710 Light Control board has one connector for the DMD Flex cable to the 0.47-inch 1080p DMD
and three LED connectors for red, green and blue LEDs.
The connectors for each LED are named on the board as well as on the light engine. Please refer to
Figure 5 to see the proper setup.
CAUTION
Ensure a good connection between the LED cable and the DMD flex cable to
the DLP4710 Light Control EVM board.
Figure 5. LED Connection
Figure 6 shows the final setup of all parts.